Tuesday, May 18, 2010

PERIPHERAL INTERFACE CONTROLLER

What is Embedded System?
   
Embedded system employs a combination of software & hardware to    perform a specific function. It is a part of a larger system which may not be a “computer”Works in a reactive & time constrained environment.
In embedded systems, the software is permanently set into a read-only memory such as a ROM or flash memory chip, in contrast to a general-purpose computer that loads its programs into RAM each time. 




There are two types of Microcontroller architecture designed for embedded system development. These are:

1)RISC- Reduced instruction set computer                                               
2)CISC- Complex instruction set computer

DIFFERENCE BETWEEN CISC AND RISC:
 CISC stands for Complex Instruction Set Computer. Most PC's use CPU based on this architecture. For instance Intel and AMD CPU's are based on CISC architectures. Typically CISC chips have a large amount of different and complex instructions. In common CISC chips are relatively slow (compared to RISC chips) per instruction, but use little (less than RISC) instructions. MCS-51 family microcontrollers based on CISC architecture.
RISC stands for Reduced Instruction Set Computer. The philosophy behind it is that almost no one uses complex assembly language instructions as used by CISC, and people mostly use compilers which never use complex instructions. Therefore fewer, simpler and faster instructions would be better, than the large, complex and slower CISC instructions. However, more instructions are needed to accomplish a task. Atmell’s AVR microcontroller based on RISC architecture. 


PIC MICROCONTROLLERS



PIC is a family of Harvard architecture microcontrollers made by Microchip Technology, derived from the PIC1640 originally developed by General Instrument's Microelectronics Division. The name PIC initially referred to "Peripheral Interface Controller".It is available in different configurations such as 8bit,16 bit,32 bit with instructions set as given below :
 


Under 8 bit comes- PIC10 xxxx, PIC12 xxxx, PIC16 xxxx, PIC18 xxxx.

(12 bit instruction set)
Under 16 bit comes- PIC24H,DSPIC30,DSPIC33. (14 bit instruction set)
Under 32 bit comes- PIC32xxxx. (16 bit instruction set)





The main features of PIC architecture is as follows



>> Separate code and data spaces (Harvard architecture)


>>A small number of fixed length instructions


>> Most instructions are single cycle execution (4 clock cycles), with single delay cycles upon branches and skips
>>A single accumulator (W), the use of which (as source operand) is implied (i.e. is not encoded in the op code)
>>All RAM locations function as registers as both source and/or destination of math and other functions.
>>A hardware stack for storing return addresses
>>A fairly small amount of addressable data space (typically 256 bytes), extended through banking
>>Data space mapped CPU, port, and peripheral registers
>>The program counter is also mapped into the data space and writable (this is used to implement indirect jumps).
>>Unlike most other CPUs, there is no distinction between memory space and register space because the RAM serves the job of both memory and registers, and the RAM is usually just referred to as the register file or simply as the registers

Saturday, April 17, 2010

TETRA- "THE FUTURE OF PRIVATE MOBILE RADIO's"

WHAT IS TETRA?????????

One of the leading standards in digital radio is TETRA, which is an open standard for digital trunked radio systems. TETRA stands for TErrestrial TRunked RAdio. TETRA is opening an even more international PMR market with widely harmonized frequencies. The European Telecommunications Standards Institute (ETSI) that joins the forces of network operators, national administrations, equipment manufacturers and users defines the standard. Terrestrial trunked radio (TETRA) is the modern digital private mobile radio (PMR) and public access mobile radio (PAMR) technology for police, ambulance, fire, transport and security services.
TETRA is a purpose built technology that offers public safety and security organisations major advantages over conventional radio systems to. It was developed to meet the needs of the most demanding professional radio users who need fast one-to-one and one-to-many radio communication using voice and data in their daily work. Users are typically public safety and security organisations such as police, fire and rescue forces. TETRA fulfils the needs of professional users and replaces old analogue and proprietary radio communication systems that no longer meet professional radio-communication needs.
TETRA is the first truly open international standard for the digital professional mobile radio environment.
        TETRA specifies a set of open interfaces and services for new professional mobile radio systems.
TETRA offers the automatic operation and frequency efficiency of trunking combined with the terminal autonomy of a conventional PMR. TETRA has a multi-mode capability by combining these two modes, trunking and direct (conventional), into single terminal equipment, and it also provides the standardised way of inter-working between these two modes. TETRA is designed to offer bandwidth-on-demand, a facility to have a variable amount of bandwidth allocated for the call duration, depending on the application.



TETRA-BASICINTERFACES


To ensure an open multivendor market, TETRA specifies the following essential interfaces:
1. Air Interface ensures the interoperability of terminal equipment from different manufacturers.
2. Terminal Equipment Interface (TEI) facilitates the independent development of mobile data applications.
3. Inter-System Interface (ISI) allows the interconnection of TETRA networks from different manufacturers.
4. Direct Mode Operation (DM0) guarantees communication between terminals also beyond network coverage




DMO-most attractive feature of TETRA



DMO is the term used by the TETRA industry to describe the ability of TETRA radio terminals to communicate directly with each other (like ‘Walkie-Talkies’) independent of the Trunked Mode Operation (TMO) network. DMO is not new and has been a fundamental mode of operation by many traditional PMR user organisations for several decades.  The primary requirement for DMO in TETRA has been brought about by the need to balance the RF coverage, Grade of Service (GoS) and reliability of a network with that of the network’s overall cost.

Typical DMO Applications
The typical applications for DMO are local area communications outside the TMO network and range extension of the TMO network.  To improve communication capabilities when using these applications, facilities are provided to enable DMO users to be contacted by TMO network users when operating outside the network as well as facilities to enhance local area DMO RF coverage performance.


APPLICATIONS

The TETRA-system is in use by the public sector in many countries. In India , Military College of Telecommunication Engineering (MCTE) uses TETRA (at Mhow, Indore, Madhya Pradesh), Kerala police(AD100) also uses this standard for communication. Recently Center For Development of Advanced Computing(CDDAC) -Trivandrum has developed a new communication system named ‘DHRUV’ for enabling communication during natural calamities ,accidents etc. which also uses TETRA as its communication standard.

The main areas  of application of TETRA are listed below-

¨     Military
¨     Police and paramilitary forces
¨     Fire Force
¨     Railways
¨     Communication in Rural areas
¨     Aid in emergency due to natural calamities
¨     Life saving communication in coasts